跳转到主要内容

Termination Bars

The OMG Termination Bar is designed to terminate single-ply membrane at parapet walls and penetrations. Termination Bar is made of extruded aluminum (6063 T6 alloy) with a mill finish, or Series #304 stainless steel alloy.

Find a Distributor Find an OMG Representative
Features & Benefits

Features & Benefits

  • Pre-punched for enhanced speed of installation.
  • Available in four configurations to accommodate most applications (Channel bar, Lip bar and Heavy Flat bar*) (*Also available in stainless steel)
  • Can be ordered with special hole spacing to meet your application needs.
Product Use

Product Use

Oval holes that measure 1/4-in. x 3/8-in. (6 x 10 mm) are punched into each bar, with standard 6, 8 or 12-in. (150, 200 or 300 mm) on center spacing.

Termination Bar can be made to order with special hole spacing. Stainless steel bar (Heavy Flat only) is punched at 6-in. (150 mm) on center only.

All OMG termination bar comes in 10-ft. (3.05 m) lengths. Aluminum bar is packaged in tubes of 50 pieces (500-ft. / 152.5 m) total. Stainless steel bar is packaged in tubes of 20 pieces (200-ft. / 61 m) total. There are 10 tubes per pallet.

Use the OMG Heavy Duty Fastener or Masonry Anchor to secure the termination bar.

Packaging Information

Packaging Information

Channel Bar

Cat. No. Width (in) Thickness (in) On-Center (OC) Spacing (in) Weight (lbs)
CHANB06 1 0.10 6 76
CHANB08 1 0.10 8 76
CHANB12 1 0.10 12 76
Leg/Lip: 1/4-in. high top & bottom leg, 90˚ angle

Lip Bar

Cat. No. Width (in) Thickness (in) On-Center (OC) Spacing (in) Weight (lbs)
LIPTB06 3/4 0.09 6 57
LIPTB08 3/4 0.09 8 57
LIPTB12 3/4 0.09 12 57
Leg/Lip: 3/16-in. wide lip, 90˚ angle

Flat Bar

Cat. No. Width (in) Thickness (in) On-Center (OC) Spacing (in) Weight (lbs)
FLATB06 1 0.09 6 57
FLATB08 1 0.09 8 57
FLATB12 1 0.09 12 57

Heavy Flat Bar (Aluminum)

Cat. No. Width (in) Thickness (in) On-Center (OC) Spacing (in) Weight (lbs)
FLATB06-18 1 0.125 6 80
FLATB08-18 1 0.125 8 80
FLATB12-18 1 0.125 12 80

Heavy Flat Bar (Stainless Steel)

Cat. No. Width (in) Thickness (in) On-Center (OC) Spacing (in) Weight (lbs)
FLATB06SS 1 0.125 6 86