Skip to main content

OMG PipeGuard®

Triangular shaped OMG PipeGuard is designed to weather the elements while securely holding rooftop pipes, tubes and conduit at heights between 1.5- and 6-inches off the surface of the roof. Four sizes accommodate ½- to 5-Inch diameter pipes, tubes and conduit. All are made from heavy duty EPDM which allows for expansion and contraction. Strut and height adjustable models are also available.

Find a Distributor Find an OMG Representative
Features & Benefits

Features & Benefits

  • Integral clamp requires no additional parts or tools.
  • Simple and fast installation generally takes less than 10 seconds per unit.
  • Maximum load capacity up to 941 lbs. per support.
Product Use

Product Use

The one-piece OMG PipeGuard makes the application fast and simple and requires no tools or additional parts for use. Simply apply pressure to open the top, place over pipe, and rotate into place.

Due to the wide range of materials used in commercial roofing systems, always consult with a design professional for the project to review and design the rooftop pipe support system based on the actual load limitations of the specific roof assembly. As with all building materials it is the responsibility of the installer to review product use with a design professional to confirm safety, compatibility and acceptance with the roof cover manufacturer as well as local building codes.

Packaging Info

Packaging Info

Cat. No. Description Pipe Size (in) Height (in) Length (in) Width (in) Max Load (lbs)
PGM-BK Mini 1.5 1.5 4 4 225
PGS-BK Small 2 3.5 4 6 650
PGTS-BK Tall Small 2 6 4 6 650
PGL-BK Large 5 3.5 4 8.5 940

Cat. No. Description Qty. per Box Weight (lbs)
PGM-BK Mini 20 20
PGS-BK Small 20 17.25
PGTS-BK Tall Small 10 29
PGL-BK Large 10 37
Sizing Chart

Sizing Chart

PipeGuard Size Chart