Skip to main content

#12 Standard RoofGrip Drill Point Fastener

The OMG Standard Roofing Fastener (#12), with deep buttress thread for high pullout resistance, is designed to secure insulation to standard steel (18 ga. - 24 ga.) and wood.  It is available in lengths from 1 5/8-in. to 8-in., and also as an Assembled Screw and Plate (OMG ASAP) with either an OMG 3-in. Galvalume plate or an OMG 3-in. Plastic Locking Plate.

Find a Distributor Find an OMG Representative
MDC Approved
FM Approved
CE Approval
Features & Benefits

Features & Benefits

  • Heavier shank & thread diameters than most "standard" roofing fasteners.
  • Extra sharp drill point for quick installation in new or reroof applications.
  • Available with #3 phillips truss head or hex head, and as an OMG ASAP.
  • OMG ASAPs can improve installation productivity.
Product Use

Product Use

Prior to job start, always contact OMG to perform a pull out test to determine deck suitability and pullout values.
The OMG Standard Fasteners must penetrate steel decks a minimum of 3/4-in. (20mm), wood plank decks a minimum of 1-in. (25mm) and plywood a minimum of 1/2-in. (13mm).
Factory Mutual requires that fasteners penetrate steel decks at the top flute.
Avoid overdriving the fastener or fracturing the skin of the insulation.  Fastener must be tight enough so that the plate doesn't turn.

Technical Data

Technical Data

Thread Diameter:   .220-in. (5.6 mm)
Shank Diameter:   .160-in. (4.1 mm)
Head Diameter:   .435-in. (11 mm)
Head Style:   #3 Phillips Truss Head; ¼-in. Hex Head

Coating:   OMG CR-10 corrosion resistant coating passes the corrosion requirements of FM Approval Standard 4470 and ETAG 006.

Plate Material (OMG ASAP):   Galvalume coated steel or polypropylene

Packaging Info

Packaging Info

Fasteners

Cat. No. Length (in) Packaging Qty Thread Length (in) Weight (lbs)
RGDP158B 1 5/8 1000 FULL 12
HHDP158B (Hex Head) 1 1000 FULL 21
RGDP214B 2 1/4 1000 FULL 16
HHDP214B (Hex Head) 2 1/4 1000 FULL 16
RGDP003B 3 1000 3 21
HHDP003B (Hex Head) 3 1000 3 21
RGDP004B 4 1000 3 26
HHDP004B (Hex Head) 4 1000 3 26
RGDP005B 5 1000 4 35
HHDP5B (Hex Head) 5 1000 4 35
RGDP006B 6 1000 4 42
HHDP006B (Hex Head) 6 1000 4 42
RGDP007B 7 1000 4 48
HHDP007B (Hex Head) 7 1000 4 48
RGDP008B 8 1000 4 50
HHDP008B (Hex Head) 8 1000 4 50

ASAPs

Cat. No. Fastener Length (in) Packaging Qty Thread Length (in) Weight (lbs)
RGDP158SPGA3AS (Steel Plate) 1 250 FULL 15
RGDP214SPGA3AS (Steel Plate) 2 1/4 250 FULL 15
RGDP003SPGA3AS (Steel Plate) 3 250 FULL 16
RGDP004SPGA3AS (Steel Plate) 4 250 3 18
RGDP005SPGA3AS (Steel Plate) 5 250 3 20
RGDP006SPGA3AS (Steel Plate) 6 250 4 21
RGDP007SPGA3AS (Steel Plate) 7 250 4 23
RGDP008SPGA3AS (Steel Plate) 8 250 4 24
RGDP214PLL3S (Plastic Plate) 2 1/4 250 FULL 11
RGDP003PLL3S (Plastic Plate) 3 250 FULL 12
RGDP004PLL3S (Plastic Plate) 4 250 3 13
RGDP005PLL3S (Plastic Plate) 5 250 3 18
RGDP006PLL3S (Plastic Plate) 6 250 4 19
RGDP007PLL3S (Plastic Plate) 7 250 4 20
RGDP008PLL3S (Plastic Plate) 8 250 4 22